Productos

SVM4D

MODEL SPEC.

Model	Volumetric Displacement Vi ( cm³/rev )	Input Flow at n = 2000r.p.m.		Torque at = 2000r.p.m.		Power Output at = 2000r.p.m.
		Theoretical	at 175 bar ∆p	at 175 bar ∆p		at 175 bar ∆p
		( l/min )	( l/min )	( in.lbs )	( Nm )	( HP )	( kW )
062	65.1	130.0	154.0	1460.0	165.0	46.4	34.6
074	76.8	154.0	178.0	1770.0	200.0	56.2	41.9
088	91.1	182.0	206.0	2088.5	236.0	66.2	49.4
102	105.5	211.0	241.0	2336.3	264.0	74.1	55.3
113	116.7	233.0	257.0	2655.0	300.0	84.2	62.8
128	132.4	265.0	289.0	3009.0	340.0	95.5	71.2
138	144.4	289.0	313.0	3292.0	372.0	104.5	77.9

Typical : 24cSt

Max.

Pressure

( kgf/cm²)

Max.

Speed

( r.p.m. )

Mounting

Standard

( SAE J477c ISO/3019-1 )

Option for

Inlet & Outlet Port

( SAE 4-bolt SAE threaded J781c ISO/DIS 6162-1 )

Moment of Inertia

Weight
( kg )

lbsin²

Kg m² x 10^-4

175

4000

SAE C

1 1/4”

1.4

4.11

29.4

Speed ( r.p.m. )
500		1000		2000		3000		3600
psi	bar	psi	bar	psi	bar	psi	bar	psi	bar
10	0.7	20	1.4	45	3.1	80	5.5	135	9.3

Model		Max. Pressure ( bar )
		HF-0 HF-2	HF-2A	HF-1	HF-3 HF-5	HF-4
SVM4D SVM4D1	062	175	175	140	-	-
	074
	088
	102
	113
	128
	138
SVM4SD SVM4SD1	062	230	190	140	140	140
	074
	088
	102	210	190
	113
	128	190	190
	138	175	175

Operating Pressure Range Drain ( bar )	*Max Speed for Low Loaded Condition ^1 ( r.p.m. )**	Max. Speed for Max. Pressure Ratings ( r.p.m. )
		HF-0, HF-2		HF-2A		HF-1
		Cont.	*Int ^2**	Cont.	*Int ^2**	Cont.	*Int ^2**
3.5	4000	2500	3600	2500	2800	2000	2500

*1. Low loaded condition 35 bar for SVM4D series, 80 bar max. for SVM4SD.

*2. Intermittent speed - Don't exceed 6 second per minute of operation.

HF-0, HF-2 = antiwear petroleum base.

HF-2A = crankcase.

HF-1 = new antiwear petroleum base.

HF-3 = water in oil emulsion.

HF-5 = synthetic fluids.

HF-4 = water glycols.

Interal drain : all these motors may be equipped with internal drain. Then the model numbers will be SVM4D1, SVM4SD1.

ORDER CODES

SVM4D - 138 - 1 N 00 - B 1 02 *

a - b - c d e - f g h i

a. Model Name :

SVM4D : external drain

SVM4D1 : internal drain, drain port is plugged

SVM4SD : external drain, severe duty motor

SVM4SD1 : internal drain, severe duty motor, drain port is plugged

b. Torque:

062, 074, 088, 102, 113, 128, 138

c. Shaft Type :

1:keyed SAE C

3:spline SAE C

S:spline SAE J718C

d. Rotation :

N:bi-directional

e. Porting Combination :

00:standard

f. Design Number : B

g. Seal Class :

1:S1 ( for SVM4D )

5:S5 ( for SVM4SD )

h. Port Connections :

01:SAE threaded port, SAE drain

02:SAE 4-bolt flange, UNC threaded - SAE drain

04:SAE 4-bolt flange, UNC threaded - BSPP drain

M4:SAE 4-bolt flange, metric threaded - BSPP drain

i. Modifications : *

PORTING COMBINATION

SYMBOLS

CURVES

DIMENSION (UNIT : mm)